Is There A Grade 10 Bolt?

How hard is a 10.9 bolt?

Used in automotive applications and for bolting large and forged parts, metric 10.9 bolts exhibit high tensile strength and good wear resistance.

Our metric grade 10.9 bolts meet ASTM A324 grade BD and SAE J429, grade 8 standards.

The yield strength of the bolts is 940 and the tensile strength is 1040 MPa..

Are stainless steel bolts stronger than Grade 8?

Stainless commonly comes in grades 18.8 (304) or T316. Stainless steel bolts are rated for corrosion resistance. … A stainless steel bolt has the same PSI rating as a grade 5 bolt (125,000 PSI). A grade 8 bolt has a stronger rating with a PSI of 150,000.

Will Grade 8 bolts rust?

Grade 8 bolts have 6 evenly spaced radial lines on the head.” Unlike stainless steel, which is highly resistant to corrosion, steel, however reinforced, will oxidize over time and rust. Grade 8 bolts that are not galvanized or plated with yellow zinc, however, are cheaper.

Are higher grade bolts more brittle?

To be fair, the higher the grade of bolt, the harder it becomes as rated by the rockwell scale. Therefore, technically a Grade 5 bolt is softer, and therefore spends more time deforming before failure.

Can Grade 8 bolts be reused?

Mechanically, bolts may be reused provided the bolt never exceeded its yield point: a simple enough definition, but one that is more complicated than it may appear. … When a bolt is functioning in its proof range, it will return to its original shape upon removal of the load.

What grade bolt has the highest shear strength?

12.9 Bolt Shear Capacity12.9 Bolts. A 12.9 bolt is one of the highest grade of bolts produced. Known for their high tensile strength, they are built with both hex and Torx heads and are available in zinc or chrome finishes. … 12.9 Shear Strength. The minimum tensile strength of a 12.9 bolt is 1220 MPa.

What does a triangle on a bolt head mean?

Close Tolerance boltThe Triangle means it is a Close Tolerance bolt .

What is the strongest grade bolt?

The strongest commercial-quality bolt is grade 8, marked by six raised dashes; its medium-carbon alloy steel has been quenched and tempered to achieve a tensile strength of 150,000 psi.

What grades are bolts?

Bolt Grade Markings and Strength ChartGrade and MaterialNominal Size Range (inches)Class 8.8 Medium carbon steel, quenched and tempered16mm – 72mmClass 10.9 Alloy steel, quenched and tempered5mm – 100mmClass 12.9 Alloy steel, quenched and tempered1.6mm – 100mm19 more rows

What is the difference between a 10.9 and 12.9 Bolt?

12.9 grade steel has 120% of the tensile strength of 10.9 grade steel. The “12” prefix indicates a tensile strength of X100 N/mm^2 and the “9” suffix indicates a multiplier. Both 12.9 and 10.9 have the same multiplier, so the comparison is straightforward: 12 to 10.

What is the difference between 8.8 and 12.9 grade bolts?

The mechanical difference between the 12.9 and 8.8 is yield strength (roughly 90% of 1200 MPa vs 80% of 800 MPa). That means the 12.9 can be stretched further (i.e. torqued to some higher value) before it yields, which of course increases the clamp force.

What is a 12.9 grade bolts?

The minimum ultimate tensile strength of the Grade 12.9 Metric Hex Head Bolts is about 1242 Mpa or 180,000 PSI, making them the highest grade of bolts produced.In fact, the Grade 12.9 Nuts is known for their high tensile strength.

Is a 10.9 Bolt stronger than Grade 8?

A tempered medium carbon steel. Class 10.9 is stronger than class 8.8. It is commonly found in high strength automotive applications. Class 10.9 is similar to grade 8.

Is there a grade 12 bolt?

Do Grade 12 bolts exist? No SAE Grade 12 exists. On the metric side, there are no grades, only property classes. The highest strength property class is 12.9 which requires a tensile strength of approximately 1200 MPa and a yield strength of about 1080 MPa.

Is grade C the same as Grade 8?

Grade C. Grade C is a thru-hardened medium carbon zinc plated alloy steel. No head markings (manufacturers mark may also be included). Finish is equivalent in strength to Grade 8 but without the yellow color.

Is 304 or 316 stainless better?

Most stainless steel ordered around the world is Grade 304. It offers the standard corrosion resistance, formability, strength, and easy maintenance for which stainless is known. While 316 comes in second in terms of quantities sold, it offers vastly superior corrosion resistance to chlorides and acids.

Are 18 8 and 304 the same?

304 stainless steel contains a minimum of 18% chromium and 8% nickel which gives its alternate name 18/8 stainless steel. 304 stainless steel contains chromium-nickel content and low carbon. This stainless steel type is oxidation and corrosion resistant.